Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Call Manager & IP Phones in LMS 4.1 topology

Hi Guys,

I have installed LMS 4.1 and discover all the devices (router/switches) but i want to show IP Phone on the LMS. I am unable to discover call manager in LMS 4.1 topology.

In Call Manager 8.6 in Cisco Serviceability under snmp setting i have enable the read community string and check snmp, MIB service are running.

AM i using the correct proecdure. How can i get the Call Manager on LMS server so that i can see IP phones on LMS topology.

8.6 is installed on VM Ware.

Looking for your reply.

Need urgent Help

Thanks in advance.

Regards,

Everyone's tags (4)
4 REPLIES
Community Member

Call Manager & IP Phones in LMS 4.1 topology

Looking for replies in the above issue..Have to solve ASAP.

Thanks

Cisco Employee

Call Manager & IP Phones in LMS 4.1 topology

Just replied on :

https://supportforums.cisco.com/thread/2162934

Along with SNMP process, the Call Manager process should also be running.

You can check if the snmp is reachable from LMS server, do a snmpwalk on CUCM either from Device Centre or you can do is from NMSROOT/objects/jt/bin/snmpwalk.

Syntax:

NMSROOT/Objects/jt/bin>snmpwalk -v -c

Example:

NMSROOT/Objects/jt/bin>snmpwalk -v 2c -c public 10.10.10.1 .1.3.6.1.2.1.1

-Thanks

-Thanks Vinod **Rating Encourages contributors, and its really free. **
Community Member

Call Manager & IP Phones in LMS 4.1 topology

Facing the same problem

with LMS 4.2.2

have you solve it fazal from tera

this is zaher

Community Member

Call Manager & IP Phones in LMS 4.1 topology

Hi Zaher,

you have to add Call Manager server in the the LMS  and add the SNMP details for LMS server details in the call manager, as far as i remember its in serviceability. Check once.

You will get the result as shown in attached images.

1059
Views
0
Helpful
4
Replies
CreatePlease to create content