Campus Manager Physical Discrepancy is reporting that BPDU-Guard is disabled on access ports when these ports are configured as trunk ports. We have mostly 4506 switches on the network, but all switches are listed in the discrepancy report. The report also contains the same entry for BPDU-Filter. Thanks for any insight.
Exported Report:
-----------------------------------
Type :BPDU-Guard disabled on access ports
Severity :High
Description :[Switch],Fa2/1,Gi1/1
First found :2007/11/14 12:18:34
Details
-------
Switch has BPDU-Guard global mode disabled
Switch has the following access ports with BPDU-Guard disabled
BPDU-Guard disabled ports:
Port Gi1/1
Port Fa2/1
------------------------------------
Switch#show int trunk
Port Mode Encapsulation Status Native vlan
Gi1/1 on 802.1q trunking 9
Fa2/1 on 802.1q trunking 9