Campus Manager 4.0.7 : User tracking doesn't report 802.1q user device
I have a question regarding what ?User tracking? of Campus Manager 4.0.7 can report.
Here?s the problem :
7206 router----Cat. 3750 switch----802.1Q trunk---IP phone (Nortel)---User PC
You can see there?s a ?802.1Q? trunk between the Catalyst 3750 switch and the IP phone. In this scenario, ?User Tracking? reports nothing on the MAC address of the phone or the user PC even if the MAC address and IP address of theses two components are part of the ARP table of the switch and router.
Then question is : Does ?User tracking? supports an access port on a switch that?s configured as a 802.1Q ?trunk? to the user devices ?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...