Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Campus Manager 5.0.1: errors in logging after running Data Collection

Hi All,

We I start a new Data Collection from Campus Manager 5.0.1 the ani.log is quickly filling up with these messages:

2007/09/17 13:34:31 EvalTask-background-18 ani ERROR StpSMFGetStpInstDevice: Unable to fetch STP device instance params from device x.x.x.x for index 9

2007/09/17 13:34:35 EvalTask-background-05 ani ERROR StpSMFGetStpInstDevice: Unable to fetch STP device instance params from device x.x.x.x for index 84

2007/09/17 13:35:31 EvalTask-background-18 ani ERROR StpSMFGetStpInstDevice: Unable to fetch STP device instance params from device x.x.x.x for index 24

2007/09/17 13:35:35 EvalTask-background-05 ani ERROR StpSMFGetStpInstDevice: Unable to fetch STP device instance params from device x.x.x.x for index 107

2007/09/17 13:36:32 EvalTask-background-18 ani ERROR StpSMFGetStpInstDevice: Unable to fetch STP device instance params from device x.x.x.x for index 803

2007/09/17 13:36:35 EvalTask-background-05 ani ERROR StpSMFGetStpInstDevice: Unable to fetch STP device instance params from device x.x.x.x for index 108

2007/09/17 13:37:32 EvalTask-background-18 ani ERROR StpSMFGetStpInstDevice: Unable to fetch STP device instance params from device x.x.x.x for index 804

2007/09/17 13:37:35 EvalTask-background-05 ani ERROR StpSMFGetStpInstDevice: Unable to fetch STP device instance params from device x.x.x.x for index 115

2007/09/17 13:38:32 EvalTask-background-18 ani ERROR StpSMFGetStpInstDevice: Unable to fetch STP device instance params from device x.x.x.x for index 806

2007/09/17 13:38:35 EvalTask-background-05 ani ERROR StpSMFGetStpInstDevice: Unable to fetch STP device instance params from device x.x.x.x for index 116

What do these messages mean and how do I fix this?

TIA!

vincent

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Campus Manager 5.0.1: errors in logging after running Data C

Not using the straight CLI. I've written a TCL script to do it provided your switch supports tclsh. Just run tclsh flash:snmp-context.tcl --help for details.

7 REPLIES
Cisco Employee

Re: Campus Manager 5.0.1: errors in logging after running Data C

These messages could point to an SNMP configuration problem. If you are using SNMPv1/v2c, you cannot have an '@' in your community string. If you do, things like STP analysis and User Tracking will fail. If you are using SNMPv3, you must have switches that support SNMP contexts, and your SNMPv3 group must have access to those contexts.

New Member

Re: Campus Manager 5.0.1: errors in logging after running Data C

Hi,

I'm using SNMPv3 with a user for LMS. This user has the v1default view associated. Probably this isn't enough. Should I associate the whole internet OID tree with the LMS user?

cheers,

vincent

Cisco Employee

Re: Campus Manager 5.0.1: errors in logging after running Data C

You need to associate the group with each VLAN context. Run "show snmp context" and add a line like:

snmp-server group mygroup v3 auth ... context vlan-6

New Member

Re: Campus Manager 5.0.1: errors in logging after running Data C

Hi,

That's a lot of different contexts... Is it possible to assign all VLAN contexts in one go?

cheers,

vincent

Cisco Employee

Re: Campus Manager 5.0.1: errors in logging after running Data C

Not using the straight CLI. I've written a TCL script to do it provided your switch supports tclsh. Just run tclsh flash:snmp-context.tcl --help for details.

New Member

Re: Campus Manager 5.0.1: errors in logging after running Data C

Hi,

Thanks for the script. I didn't know TCL was supported on IOS. On all my access switches, I use ip-base 12.2.37SE1. Unfortunately TCL isn't supported on this release. So I guess I just have to do it manually.

cheers,

Vincent

Cisco Employee

Re: Campus Manager 5.0.1: errors in logging after running Data C

TCL support didn't come for the desktop switches until 12.2(40)SE. So, yes, you will have to do the configuration manually.

221
Views
0
Helpful
7
Replies