I have 40+ sites being managed by CM and I have an issue with the way CM is drawing the map. We recently added a new site which has a router with a LAN subnet (172.29.40.0) on it's g0/0 interface. This subnet overlaps with another site that uses that subnet so when CM draws the map with the new site it ties both sites together and its messy since there are many devices in each site. I tried making the 172 subnet a secondary address but CM still finds it. Changing the IP is not an option - is there a way to trick CM somehow so it doesnt link the two sites together?
There's really no way to get around this in Campus Manager. The filtering mechanism would not be able to tell the "good" 172.29.40.0 subnet from the "bad" one. A workaround would be to manage the two sites using different instances of Campus Manager. Of course, this would require that each of the devices on the two 172.29.40.0 subnets are managed by unique IP addresses (e.g. there is only one 172.29.40.13 in the whole network).
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...