Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Campus Manager 5.1.1 IP Phones only show as End Hosts

I can not get CW to recognize our IP phones. I upgraded Campus Manger to 5.1.1 and that did not help. I need to know how to get my call manager to show up in the topology report. I think once that is working, the phones will show up.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Campus Manager 5.1.1 IP Phones only show as End Hosts

Your CCMs must have SNMP configured, and they must be SNMP reachable from the LMS server. When that is working, the CCM will show up green as an Application Server on the Campus Manager topology map. Once that is happening, you need to run a new UT acquisition to pull the IP phone details.

4 REPLIES
Cisco Employee

Re: Campus Manager 5.1.1 IP Phones only show as End Hosts

Your CCMs must have SNMP configured, and they must be SNMP reachable from the LMS server. When that is working, the CCM will show up green as an Application Server on the Campus Manager topology map. Once that is happening, you need to run a new UT acquisition to pull the IP phone details.

New Member

Re: Campus Manager 5.1.1 IP Phones only show as End Hosts

Thanks, it's working now. I had to add the SNMP RO community string to CCM. Will the phones continue to show up under End Hosts or just under IP Phones?

Cisco Employee

Re: Campus Manager 5.1.1 IP Phones only show as End Hosts

They should show up under both. All phones must first be an end host. Then, the phone data is pulled from the ccmPhoneTable from the CCM.

New Member

Re: Campus Manager 5.1.1 IP Phones only show as End Hosts

Thanks for the help!

144
Views
0
Helpful
4
Replies
CreatePlease to create content