05-17-2007 03:19 PM
Hi all,
I am trying to get a topology map of my network with Campus Manager but the Topology map does not show the serial links between the routers, is the campus manager topology map able to display serial links between routers?
Solved! Go to Solution.
05-17-2007 05:54 PM
CDP must be explicitly enabled on multi-point links with the "cdp enable" command.
05-17-2007 03:25 PM
Yes, provided CDP is running on both ends of each link, and each router sees the other as its CDP neighbor (i.e. in the output of "show cdp neighbor").
05-17-2007 05:18 PM
Hi Joe,
Thans for the reply, and you are right, I can olny see the serial links that appera on the cdp neigh table. I have some multipoint serial links that even with cdp running globally I am not able to see them in the map, do you know if there is something I can do to see these multipoint links?
thanks!
05-17-2007 05:54 PM
CDP must be explicitly enabled on multi-point links with the "cdp enable" command.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide