Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Campus Manager Topology Map

Hi all,

I am trying to get a topology map of my network with Campus Manager but the Topology map does not show the serial links between the routers, is the campus manager topology map able to display serial links between routers?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Campus Manager Topology Map

CDP must be explicitly enabled on multi-point links with the "cdp enable" command.

3 REPLIES
Cisco Employee

Re: Campus Manager Topology Map

Yes, provided CDP is running on both ends of each link, and each router sees the other as its CDP neighbor (i.e. in the output of "show cdp neighbor").

New Member

Re: Campus Manager Topology Map

Hi Joe,

Thans for the reply, and you are right, I can olny see the serial links that appera on the cdp neigh table. I have some multipoint serial links that even with cdp running globally I am not able to see them in the map, do you know if there is something I can do to see these multipoint links?

thanks!

Cisco Employee

Re: Campus Manager Topology Map

CDP must be explicitly enabled on multi-point links with the "cdp enable" command.

308
Views
0
Helpful
3
Replies
CreatePlease to create content