I wonder if anyone can help, I have 7 Cisco 3750s that as soon as the Data Collection Schedule kicks in, every 4 hours, SNMP stops on the switches. The switches are still available on the network however Fault Manager and our separate SNMP monitoring tool flag up the issue.
I have other 3750 switches with the same IOS on them and they are not affected.
When this problem occurs, you need to capture the output of "show stack PID" from a switch where PID is the process ID of the SNMP ENGINE and IP SNMP processes. You may need to run these commands a few times in quick succession while the problem is occurring. Post the output as well as the show version from the switch.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.