Can IPSLA work with PTP(Precision Time Protocol) or Synchronous Ethernet?
I'm working on IPSLA with NTP, but I couldn't get the value of One-Way Delay in IPSLA.
I think the time gap between the Source and Responder is bigger than the acceptable time gap for One-Way Delay in IPSLA.
So, One idea hitting my head is to use the PTP or SynchE, but I'm sure if it will be working or not.
And another condition in this scenario is that the network device which was originally working as a master in NTP should give the time value to other systems i.e PC and servers. PTP or SynchE can give ??
I'm using ME3600X-24FS-M (License : Advanced Metro IP Access) 15.3(2)s1.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...