Do you mean that Sync Archive jobs are failing for this device, or RME is constantly showing the startup and running configurations as being out of sync? If the latter, and if RME thinks the community strings are out of sync, check the values to make sure they are the same. If the former, what errors do you get trying to sync the archive?
On the RME home screen under "Config Archive" the same device is always out of sync. When I look at the difference between the configs using the diff only function is shows up exactly as I indicated in the previous post...all asterisks. When I log into the device, viewing the startup config I can see the actual community name next to "snmp-server community", while viewing the running config, there are asterisks for "snmp-server community"
snmp-server community l*****R (I put the asterisks are to hide actual string)
snmp-server community ******* (asterisks actually showing up in the config)
When I view the diff between the config in RME, see the attachment as to what I am seeing.
You're seeing the product of CSCsu90370. This bug requested that SNMP community strings in show run be masked on the ASA/PIX. The bug was fixed in 8.0(4.8).
Since the ASA is no longer providing the clear text SNMP community in the running config, RME has no way to know if its value is in sync with the startup config, and thus the out of sync entry is expected.
Given this, you might consider adding an exclude for this command under RME > Admin > Config Mgmt > Exclude Commands.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.