Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Can't disconnect Users from 6509 catalyst

i do a sh users, we have 16 connected vty users. We use Radius authentication on the switch. the disconnect command is not working. Anyone have any suggestions..

CTYSTSWTXXX#

CTYSTSWTXXX#sh users

Line User Host(s) Idle Location

1 vty 0 idle 1y45w 172.19.30.100

2 vty 1 idle 1y34w 172.19.30.100

3 vty 2 lab idle 1y39w 172.19.30.100

4 vty 3 lab idle 1y30w 172.19.30.100

5 vty 4 lab idle 1y26w 172.19.30.100

6 vty 5 example idle 1y2w 172.19.30.100

7 vty 6 idle 42w3d 172.19.30.100

8 vty 7 idle 42w2d 172.19.30.100

9 vty 8 example idle 40w4d 172.19.30.100

10 vty 9 example idle 40w3d 172.19.30.100

11 vty 10 example idle 39w2d 172.19.30.100

12 vty 11 idle 34w0d 172.19.30.100

13 vty 12 example idle 23w3d 172.19.30.100

14 vty 13 example idle 20w1d 172.19.30.100

15 vty 14 example2 idle 17w2d 172.19.30.100

* 16 vty 15 example3 idle 00:00:00 172.19.30.100

Interface User Mode Idle Peer Address

CTYSTSWTXXX#disco

CTYSTSWTXXX#disconnect ?

<0-0> The number of an active network connection

WORD The name of an active network connection

ssh Disconnect an active SSH connection

<cr>

CTYSTSWTXXX#disconnect 1

?Invalid connection name

CTYSTSWTXXX#disconnect 11

?Invalid connection name

CTYSTSWTXXX#

CTYSTSWTXXX#disconnect ssh vty 1

% VTY2 is not a SSH connection

3 REPLIES
Blue

Re: Can't disconnect Users from 6509 catalyst

Try "show line" and "clear line #".

New Member

Re: Can't disconnect Users from 6509 catalyst

New Member

i know this was a very old

i know this was a very old forum, but it help.

solution above works.
 

2356
Views
8
Helpful
3
Replies
CreatePlease to create content