Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cannot Fetch Device Configs

Hi

Iam not able to fetch my Device configs in RME. It shows the error

" TELNET: Failed to establish TELNET connection to 10.1.254.102 - Cause: Connection refused. PRIMARY-STARTUP config Fetch Operation failed for TFTP. Could not detect protocols running on the device Failed to fetch config using RCP.Connection refused: connect Verify RCP is enabled or not. "

I have given complete IPpermission between LMS and the devices in my PIX.

Can anyone guide me on this

Thanks and regards

Rajesh

2 REPLIES
Cisco Employee

Re: Cannot Fetch Device Configs

Should telnet work? According to this error, the device is either not listening on tcp/23, or there is a filter between the LMS server and the device which is RSTing the connection attempt.

New Member

Re: Cannot Fetch Device Configs

Hi clarke...

Thanks for your reply. Actually I had missed out some configs in the device.

I had missed the command in the cisco devices.

Now it works fine

Thanks and regards

Rajesh

150
Views
0
Helpful
2
Replies
CreatePlease to create content