I have downloaded and installed SDM onto my laptop and downloaded the SDM_Demo_Tool file which I copied to C:\ as instructed. I then ran SDM, entered 127.0.0.1 and received an error message saying that the router cannot be contacted or is not running HTTP/HTTPS. Any ideas on why this is not working as checking through forums no one else seems to be having this problem
Since you have a router I would recommend using the actual SDM as opposed to the demo. I will tell you that SDM demo does not work with Vista yet (or Mac which I believe you mentioned in your other post in the tools thread)! Use the regular SDM with a Windows OS! You must enable the HTTP server on the router (you referenced AAA and yes, you must perform the aaa new-model command from CLI but that is for AAA.. you can then enable AAA from within SDM)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...