Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cat4507 IOS upgradation

Sir,

We have upgrade our Cisco4507 switch with new IOS cat4500-ENTSERVICESK9-M, Version 12.2(54)SG, we are using LMS3.1. In RME we can not see the above IOS in software repository.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: cat4507 IOS upgradation

I don't understand.  You've already upgraded your 4507?  Why do you need to see the 12.2(54)SG image in the RME software repository?  I did a brief test locally, and I can add a 12.2(54)SG image from Cisco.com into my repository.

3 REPLIES
Cisco Employee

Re: cat4507 IOS upgradation

I don't understand.  You've already upgraded your 4507?  Why do you need to see the 12.2(54)SG image in the RME software repository?  I did a brief test locally, and I can add a 12.2(54)SG image from Cisco.com into my repository.

New Member

Re: cat4507 IOS upgradation

Sir,

we use LMS 3.1 &  we see our network device connected with IOS details on RME on software summary. Recently we have upgrade our one cisco4507 IOS from 12.2(50)SG1 to 12.(54)SG thru ISSU. After IOS upgradation we unable to see our upgrade IOS on this software summary page.

What steps require to see upgrade IOS on this RME IOS software summary page.

Cisco Employee

Re: cat4507 IOS upgradation

All you should need to do is run a new Inventory Collection for the switch under RME > Devices > Inventory > Inventory Collection Jobs.

217
Views
0
Helpful
3
Replies