Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

CDP neighbors not showing up in device center

A few of my devices are not showing their neighbors in the device center. On the switch, CDP is working correctly on both ends, but in device center, the neighbors don't show up. Device types are wide range, 3550's, 3560's and 12G's.

1 REPLY
Cisco Employee

Re: CDP neighbors not showing up in device center

The neighbor list is built using Campus Data Collection. So if this list is incomplete, make sure you have run a recent Data Collection. Additionally, there have been some bugs in earlier versions of Campus Manager. If you're on one of Campus 4.0.12, 5.0.4, or 5.1.1, you might try reinitializing the ANI database, then run a new Data Collection. This can cause missing devices to be found.

The ANI database can be reinitialized with the command:

NMSROOT/bin/perl NMSROOT/bin/dbRestoreOrig.pl

296
Views
0
Helpful
1
Replies
CreatePlease to create content