Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Changing Ciscoview port colors for ports in error disable

The default color for ports that are not connected is red. I would like to change the color for red to be error disable and ports not connected to be some other color. What do I have to configure to change the colors?

5 REPLIES
Cisco Employee

Re: Changing Ciscoview port colors for ports in error disable

The colors cannot be changed. They are hard-coded within CiscoView.

New Member

Re: Changing Ciscoview port colors for ports in error disable

So how do I view through lms an error disabled port?

Cisco Employee

Re: Changing Ciscoview port colors for ports in error disable

What device type?

New Member

Re: Changing Ciscoview port colors for ports in error disable

3750 and 2960 switches

I am trying to configure a way to trap and capture error disabled ports.

Cisco Employee

Re: Changing Ciscoview port colors for ports in error disable

Monitoring errdisable ports for these devices is not possible in CiscoView. However, depending on your IOS version, you may have built-in errdisable trap support. All you would need to do is enabling the sending of errdisable traps. For example:

snmp-server enable traps errdisable

The traps sent will be cErrDisableInterfaceEvent traps from the CISCO-ERR-DISABLE-MIB.

See http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml for more on the errdisable detection and recovery feature.

192
Views
10
Helpful
5
Replies
CreatePlease to create content