Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Changing the IP on Cisco Works LMS 2.5-UR-K9

I need to change the IP on my Server that have installed Cisco Works LMS 2.5-UR-K9.

I already do it, but when try to enter the LSM I can only get to the User and Password page, I can't get in.

If I return to the ols IP it works find.

Is there a special procedure to change the IP addresss of the Cisco Works Server??

I'll apreciate your comments.

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Red

Re: Changing the IP on Cisco Works LMS 2.5-UR-K9

There is nothing special if all you do is change the ip address of the server. However, you have to make sure that you update your DNS (or whatever name resolution mechanism you are using).

For additional information:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/cw2000_d/comser30/usrguide/diagnos.htm#wp1078369

1 REPLY
Red

Re: Changing the IP on Cisco Works LMS 2.5-UR-K9

There is nothing special if all you do is change the ip address of the server. However, you have to make sure that you update your DNS (or whatever name resolution mechanism you are using).

For additional information:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/cw2000_d/comser30/usrguide/diagnos.htm#wp1078369

98
Views
0
Helpful
1
Replies