he Circuit Interface MIB provides a MIB object (cciDescr) that can be used to identify individual circuit-based interfaces for Simple Network Management Protocol (SNMP) monitoring. Circuit interface identification persistence maintains the user-defined name of the circuit across reboots by retaining the value of the cciDescr object in the Circuit Interface MIB (CISCO-CIRCUIT-INTERFACE-MIB). A consistent value for specific circuits is useful for network management applications that use SNMP. Circuit interface identification persistence is enabled using the snmp mib persist circuit global configuration command. This command is disabled by default because this feature uses NVRAM memory.
To enable MIB persistence for all available MIB types, use the snmp mib persist command without keywords.
You won't get a response for ciscoIfExtUtilization (.184.108.40.206.220.127.116.11.276.1.4) or cieIfUtilEntry because these are not accessible objects. Have a look at the MAX-ACCESS for each object and you can see which are read or read-write, vs not-accessible
Try polling the following objects and you should get responses:
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.