Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 1841 ISR and SDM

When I attempted to log into a Cisco 1841 ISR, the SDM banner motd showed that I had to use the default username and password cisco to access the router, then change them. I changed the username and password and saved the updates to startup-config. I wanted to remove the requirement for a username and password at console login so and I went back into config and issued a no username' command for the username I added  and saved the updates to startup-config. I logged out and couldn't log back in. I attempted a password recovery by breaking the boot with a confreg 0x2142 , and rebooted the router , and I am still locked out. I am guessing I could copy the startup-config to from another router to removable flash, put that flash in the router I screwed up , and boot from flash ? Any tips would be most welcomed. Thanks

Everyone's tags (4)
692
Views
0
Helpful
0
Replies