Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Cisco 1861 ISR: snmpwalk timeout on sysObjectID MIB variable

Hi folks!

I'm doing a snmpwalk query on a Cisco 1861 ISR.

I'quering the following MIB variables:

C:\>snmpwalk -v2c -c public 88.63.17.142 sysdescr

SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software, C1861 Software (C1861-ADVIP SERVICESK9-M), Version 12.4(11)XW5, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Sat 17-Nov-07 05:31 by prod_rel_team

C:\>snmpwalk -v2c -c public 88.63.17.142 sysObjectID

Timeout: No Response from 88.63.17.142

The sysObjectID goes in timeout.

What kind of problem I'm hitting?

Any ehlps would be appreciate.

Thanks a lot

Leonardo

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco 1861 ISR: snmpwalk timeout on sysObjectID MIB variable

Most likely. This code looks to be the same code that ships with the router. You should probably move to a 12.4T release (e.g. 12.4(15)T). You may be seeing a stack trace on the router's console when you poll for sysObjectID. If so, that would be helpful.

4 REPLIES
Cisco Employee

Re: Cisco 1861 ISR: snmpwalk timeout on sysObjectID MIB variable

The syntax looks fine. What other objects time out? Is it just sysObjectID, or are there others? Does sysObjectID always time out? If possible, enable "debug snmp packet", repeat the problem, and post the output.

Community Member

Re: Cisco 1861 ISR: snmpwalk timeout on sysObjectID MIB variable

yes Joe,

the only MIB variable timeout is sysObjectID.

Is it possible a IOS bug?

I will enable debug as you suggest.

Thanks

Leonardo

Cisco Employee

Re: Cisco 1861 ISR: snmpwalk timeout on sysObjectID MIB variable

Most likely. This code looks to be the same code that ships with the router. You should probably move to a 12.4T release (e.g. 12.4(15)T). You may be seeing a stack trace on the router's console when you poll for sysObjectID. If so, that would be helpful.

Community Member

Re: Cisco 1861 ISR: snmpwalk timeout on sysObjectID MIB variable

thank you very much

710
Views
3
Helpful
4
Replies
CreatePlease to create content