Hello..I purchased a Cisco 2620XM Router with a FastEthernet NM-1FE-TX module in it, from a Business Auction that was held in my area.
- The current IOS is c2600-ipbase-mz.122-5
- How do I obtain the latest IOS for the router?? (Base Image with Firewall)....or whatever someone would like to suggest.
I would like to configure and use the router on my home network... it would be the (A) Roadrunner Cable Modem__>>>__(B) Cisco 2620xm Router__>>>__(C) Microsoft ISA 2006 Server......but I would remove the ISA server if the router has the Firewall in it.
I tried to find the IOS versin that is the latest and greatest.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...