Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 2960 Temperature OID

I have load CISCO-ENVMON-MIB and initiate walk in it but unable to find OID of Cisco 2960 temperature monitor..

I have search over net and found .1.3.6.1.4.1.9.9.13.1.3.1.3.1 for temperature but this OID is not responding in this mib.

Regards,

Arshad Ahmed

2 REPLIES
Cisco Employee

Re: Cisco 2960 Temperature OID

Hi,

What is the version of IOS you are using?  What is your SNMP config?

Here is an example output:

snmpwalk -v2c -c public 10.12.12.12 .1.3.6.1.4.1.9.9.13

SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.1 = STRING: "chassis"

SNMPv2-SMI::enterprises.9.9.13.1.3.1.6.1 = INTEGER: 5

SNMPv2-SMI::enterprises.9.9.13.1.4.1.2.1 = STRING: "chassis"

SNMPv2-SMI::enterprises.9.9.13.1.4.1.3.1 = INTEGER: 1

SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1 = STRING: "internal power supply"

SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.1 = INTEGER: 1

SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.1 = INTEGER: 0

SNMPv2-SMI::enterprises.9.9.13.1.6.0 = Hex-STRING: 00

SNMPv2-SMI::enterprises.9.9.13.2.1.0 = INTEGER: 2

SNMPv2-SMI::enterprises.9.9.13.2.3.0 = INTEGER: 2

SNMPv2-SMI::enterprises.9.9.13.2.4.0 = INTEGER: 2

SNMPv2-SMI::enterprises.9.9.13.2.5.0 = INTEGER: 2

SNMPv2-SMI::enterprises.9.9.13.2.6.0 = INTEGER: 2

To verify that the MIB exists in your image please navigate to: 

http://tools.cisco.com/Support/SNMP/do/MIBSupport.do?local=en&step=3

Once there, issue a 'sh ver' on your device and copy and paste the entire name into the tool.

Thanks

New Member

Cisco 2960 Temperature OID

HI,

I am using cisco 2960 with lan lite image with following features.

Sw Image : C2960-LANLITEK9-M

Model : WS-C2960-24TC-S

Sw Version : 12.2(50)SE4

and the snmp configuration is ..

snmp-server host A:B:C:D version 2c test123

snmp-server enable traps envmon fan shutdown supply temperature status

Regards,

Arshad Ahmed

6957
Views
0
Helpful
2
Replies