Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 3725 High Cpu Load

This is very strange to me that router is using 24% cpu while sh proc does not show any process the one using/eating this one.

show proc cpu ouyput..

Router# sh proc cpu | exc 0.00%__0.00%__0.00%

CPU utilization for five seconds: 25%/24%; one minute: 25%; five minutes: 24%

PID Runtime(ms) Invoked uSecs

5Sec 1Min 5Min TTY Process

2 1816 1261734 1 0.00% 0.02% 0.00% 0 Load Meter

5 3552392 645526 5503 0.00% 0.05% 0.05% 0 Check heaps

47 1976700 106531 18555 0.32% 0.03% 0.00% 0 Per-minute Jobs

86 1342800 9707593 138 0.08% 0.01% 0.00% 0 IP Input

128 1668 12617805 0 0.00% 0.02% 0.00% 0 DHCPD Receive

140 2384 63082727 0 0.08% 0.02% 0.00% 0 RBSCP Background

203 738464 28841181 25 0.08% 0.01% 0.00% 0 BGP Router

234 11756 197143943 0 0.08% 0.07% 0.08% 0 PPP manager

235 7372 197150221 0 0.08% 0.04% 0.06% 0 PPP Events

246 897856 420780 2133 0.16% 0.01% 0.00% 0 BGP Scanner

247 804 60870 13 0.00% 0.20% 0.09% 162 Virtual Exec

248 42680 2105112 20 0.00% 0.00% 0.31% 163 Virtual Exec

Router: 3725

IOS: 12.4 (3b)

If you look into the output; one can see that cpu usage is above 24% but there is no process taking this or even we combine all the process using cpu, it is still less than 1 or 2 %....

What could be wrong? How can I check which process is using this amount of cpu. :)

  • Network Management
1 REPLY
220
Views
0
Helpful
1
Replies
This widget could not be displayed.