I have a 7507 with rsp2 in slot2 w/ 128M Dram,64 ata,8 flash. Have cx-fsip slot4,cx-aim slot5,cx-eip6 slot1, vip2-40 w/ pa-fe-tx out of cx-feip in slot0.
It worked fine until it was moved and the modules were pulled and reseated. I thought it might have been the daughter card on the backplane so I pulled the front cover and reseated all the daughter cards. When I put cards only in cybus 0 it works fine. When I load all cards in I get the following errors. There is also a sho ver in the logs. I started logging after boot, OIRd some cards and finally removed them.
