Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 891, NAT is to strict, How to open ports for all internal users to access XBOX Live.

I need to config a new 891 to allow access to all users, to access XBOX live. Im unable to get the NAT below moderate or route to more than one internal address.                  

2 REPLIES
New Member

Re: Cisco 891, NAT is to strict, How to open ports for all inter

Does your nat statement have the word "overload" at the end. This actually turns on PAT and allows for multiple devices to be translated to the outside interface.

Sent from Cisco Technical Support iPhone App

New Member

Re: Cisco 891, NAT is to strict, How to open ports for all inter

Sorry for the delay.

This is a new unit and I dont have experience with the enterprise products. Its seems to work well, just the issues with XBOX Live.

I do have OVERLOAD included in one statement:

 

Router(config)#ip nat inside source list 1 interface FastEthernet 8 overload

but Im still having the issue.

Basically I have 1 ip address on the outgoing port and DHCP on all of the inside ports. I would like for the NAT to be OPEN for all of my users on the needed ports.

 

UDP 53

TCP 53

TCP 80

UDP 88

UDP 3074

TCP 3074

Im just not sure where to start, as the commands I have tried are not working.

Thanks

Rich

1045
Views
0
Helpful
2
Replies