Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco catalyst 2690 switch vlanTable

Hi,

I have a cisco catalyst 2690 switch.
I want monitoring IP, MAC, and Port Address.
I use this docu: http://docstore.mik.ua/orelly/perl/sysadmin/ch10_03.htm

This works great:
htvtef7-nagios:/ # snmptranslate -On BRIDGE-MIB:dot1dTpFdbTable
.1.3.6.1.2.1.17.4.3
snmpwalk -c tef7snmp@761 -v 2c 10.76.1.7 .1.3.6.1.2.1.17.4.3

htvtef7-nagios:/ # snmptranslate -On BRIDGE-MIB:dot1dBasePortTable
.1.3.6.1.2.1.17.1.4
snmpwalk -c tef7snmp@761 -v 2c 10.76.1.7 .1.3.6.1.2.1.17.1.4

htvtef7-nagios:/ # snmptranslate -On CISCO-STACK-MIB:vlanTable
.1.3.6.1.4.1.9.5.1.9.2

But I get a error:
htvtef7-nagios:/ # snmpwalk -c tef7snmp -v 2c 10.76.1.7 .1.3.6.1.4.1.9.5.1.9.2
SNMPv2-SMI::enterprises.9.5.1.9.2 = No Such Object available on this agent at this OID

Switch config:
snmp-server community testament RO
snmp-server community tef7snmp RO
snmp-server location XYZ
snmp-server contact MR.XYZ
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps tty
snmp-server enable traps cluster
snmp-server enable traps entity
snmp-server enable traps cpu threshold
snmp-server enable traps vtp
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps flash insertion removal
snmp-server enable traps port-security
snmp-server enable traps envmon
snmp-server enable traps mac-notification
snmp-server enable traps copy-config
snmp-server enable traps config
snmp-server enable traps bridge newroot topologychange
snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency
snmp-server enable traps syslog
snmp-server enable traps vlan-membership
snmp-server host XXX.XXX.XXX.XXX public
snmp-server host YYY.YYY.YYY.YYY  tef7snmp

What did I do wrong?
THX!

4 REPLIES
Blue

Re: cisco catalyst 2690 switch vlanTable

Assuming you're referring to a 2960, I don't think you did something "wrong" in terms of those snmp-server configs. The IOS and/or 2960 combo simply might not have support for the CISCO-STACK-MIB. To verify, post the output of "show snmp mib" from the switch, in enable mode. Or, check the Cisco Feature Navigator: http://tools.cisco.com/ITDIT/CFN/

New Member

Re: cisco catalyst 2690 switch vlanTable

Thx for the replay!

I use on the switch c2960-lanbasek9-mz.122-25.SEE3.bin (IOS),

the Cisco Feature Navigator say, this IOS support the CISCO-STACK-MIB:

http://tools.cisco.com/ITDIT/MIBS/MainServlet?ReleaseSel=0&PlatformSel=0&fsSel=0&IMAGE_NAME=c2960-lanbasek9-mz.122-25.SEE3.bin&SUBMIT2=Submit&IMAGE_ID=816103

In show snmp mib I could not find the vlanTable. See the attachment.

I du not understand!

Blue

Re: cisco catalyst 2690 switch vlanTable

It does have vlanTable support. The following in the "show snmp mib" output are what you're looking for (where "cisco" is equivalent to ".1.3.6.1.4.1.9")

cisco.5.1.9.2.1.1 => 1.3.6.1.4.1.9.5.1.9.2.1.1 / vlanIndex
cisco.5.1.9.2.1.2 => 1.3.6.1.4.1.9.5.1.9.2.1.2 / vlanSpantreeEnable
cisco.5.1.9.2.1.3 => 1.3.6.1.4.1.9.5.1.9.2.1.3 / vlanIfIndex

You can look up what each means here;

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.4.1.9.5.1.9.2.1.1&translate=Translate

So what you want to do is

snmpwalk .1.3.6.1.4.1.9.5.1.9.2.1.1

snmpwalk .1.3.6.1.4.1.9.5.1.9.2.1.2

snmpwalk .1.3.6.1.4.1.9.5.1.9.2.1.3

then correlate across thpse results, as well as the other OIDs in your original post.

New Member

Re: cisco catalyst 2690 switch vlanTable

did not work

htvtef7-nagios:/usr/share/snmp/mibs # snmpwalk -v 2c -c tef7snmp 10.76.1.7 .1.3.6.1.4.1.9.5.1.9.2.1.1
SNMPv2-SMI::enterprises.9.5.1.9.2.1.1 = No Such Instance currently exists at this OID
htvtef7-nagios:/usr/share/snmp/mibs # snmpwalk -v 2c -c tef7snmp 10.76.1.7 .1.3.6.1.4.1.9.5.1.9.2.1.2
SNMPv2-SMI::enterprises.9.5.1.9.2.1.2 = No Such Instance currently exists at this OID
htvtef7-nagios:/usr/share/snmp/mibs # snmpwalk -v 2c -c tef7snmp 10.76.1.7 .1.3.6.1.4.1.9.5.1.9.2.1.3
SNMPv2-SMI::enterprises.9.5.1.9.2.1.3 = No Such Instance currently exists at this OID

cisco snmp mibs V1 and V2 have a difference?

ftp://ftp-sj.cisco.com/pub/mibs/v1

ftp://ftp-sj.cisco.com/pub/mibs/v2

1837
Views
0
Helpful
4
Replies
CreatePlease login to create content