Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco Catalyst 2950 24 - Unable to configure SPAN?

Hi,

I would like to configure SPAN in one of our Cisco Catalyst 2950 24 switch, but the IOS I downloaded doesn't support SPAN even though it is written in its feature description. Here is the IOS:  c2950-i6k2l2q4-mz.121-22.EA13.bin.

Here is the output of the show version:

####sh version
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA13, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by cisco Systems, Inc.
Compiled Fri 27-Feb-09 22:20 by amvarma
Image text-base: 0x80010000, data-base: 0x80680000

ROM: Bootstrap program is C2950 boot loader

sw uptime is 34 minutes
System returned to ROM by power-on
System restarted at 08:10:11 GMT Wed Oct 20 2010
System image file is "flash:c2950-i6k2l2q4-mz.121-22.EA13.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2950-24 (RC32300) processor (revision B0) with 19912K bytes of memory.
Processor board ID FOC0543Y03W
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:07:EB:1F:39:40
Motherboard assembly number: 73-5781-08
Power supply part number: NONE
Motherboard serial number: FOC0542041V
Power supply serial number: DAB05411TWP
Model revision number: B0
Model number: WS-C2950-24
System serial number: FOC0543Y03W
Configuration register is 0xF

When I enter into the interface configuration mode, there is no "port monitor" command. Here is the output:

fsw(config)#interface FastEthernet0/2
fsw(config-if)#por
fsw(config-if)#por?
% Unrecognized command

Please could someone tell me what is the problem with this.

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Cisco Catalyst 2950 24 - Unable to configure SPAN?

You need to use the global commands

monitor session x source interface

montior session x destination interface

where x is the span session number and the applicable interfaces follow, you can also specify direction after the interface number

2 REPLIES
New Member

Re: Cisco Catalyst 2950 24 - Unable to configure SPAN?

You need to use the global commands

monitor session x source interface

montior session x destination interface

where x is the span session number and the applicable interfaces follow, you can also specify direction after the interface number

New Member

Re: Cisco Catalyst 2950 24 - Unable to configure SPAN?

Thanks, that really helped .

483
Views
0
Helpful
2
Replies
CreatePlease to create content