Hello,
With the command " snmpwalk -v2c -c Equant 10.120.162.130 1.3.6.1.4.1.9.9.68.1.2.2.1.2 ",
I'm able to get some info on VLAN configured for each port.
"
SNMPv2-SMI::enterprises.9.9.68.1.2.2.1.2.10102 = INTEGER: 20
SNMPv2-SMI::enterprises.9.9.68.1.2.2.1.2.10103 = INTEGER: 510
SNMPv2-SMI::enterprises.9.9.68.1.2.2.1.2.10104 = INTEGER: 100
SNMPv2-SMI::enterprises.9.9.68.1.2.2.1.2.10105 = INTEGER: 1
"
However, when there's an agregation of VLAN on a port, I can't read trunk port setup.
Is there an OID which allows this ?
Thank's in advance.
Kind regards
Oliver