10-20-2009 12:56 PM
LMS3.2 on Solaris 10
I'm unable to manage in RME the Cisco CGESM switches for HpBlade Enclosure
I'm running cgesm-lanbasek9-mz.122-40.SE.bin image and RME 4.3 device
table says that is is support. Config archive works fine but inventory fails with the following error:
RICS0001:Internal Error,unable to process the collected data from the device
I ran snmpwalk and compared the results with the Cisco 3020 switch and noticed that cgesm switches are missing bunch of mibs including interface mibs. I also tried to add it in the Solarwind and it returned with the error that interface mibs are missing. Please advise.
10-20-2009 02:31 PM
How is this switch configured? Post the IC_Server.log.
10-21-2009 06:56 AM
10-21-2009 09:32 AM
Where is the running config from this switch?
10-22-2009 04:52 AM
10-22-2009 07:38 AM
You are seeing CSCso45451. If you upgrade to 12.2(44)SE2 all these problems with LMS and Solar Winds should go away.
10-22-2009 07:47 AM
Thank you for your help.
10-22-2009 08:26 AM
I have one last quick question, since inventory is not collected for these switches, I will not be able to upgrade the code via CiscoWorks, correct?
10-22-2009 08:32 AM
Correct. You must first do the upgrade manually to get around the bug, then you can use LMS to manage the switch moving forward.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide