Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CISCO-CONFIG-COPY missing OID 12.4-15 T1

Hello,

we usually use the SNMP-Copy-Method for saving configuration to a tftp server.

Last week we installed a new 876 IOS 12.4-15 T1. Tried to copy the config via snmp and it failed. Checking the oid's showed that the OID-Tree 1.3.6.1.4.1.9.9.96 isn't there! Any other OID works! Why? Any suggestions?

1 REPLY
Cisco Employee

Re: CISCO-CONFIG-COPY missing OID 12.4-15 T1

The objects in the CISCO-CONFIG-COPY-MIB are implemented as read-create which means a walk of this MIB would should nothing unless you created a config copy operation, and instantiated a row in the ccCopyTable. I don't know the exact feature set running on your 876, but I know the CISCO-CONFIG-COPY-MIB is supported in ADVIPSERVICES, and if you try setting the objects in the ccCopyTable, it should work.

206
Views
5
Helpful
1
Replies