Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco EEM and EOT

Hi

Quick question - I am trying to get EOT working with EEM but current IOS I have doesn't seem to support the stub-object. I've upgraded my IOS to c2800nm-entservicesk9-mz.124-25c.bin so it should come with Embedded Event Manager 2.2. However when I try to configure a track 3 stub-object,  the stub-object feature is not there.  What I am trying to do is find a GD release that I could roll out everwhere but I've been through the Cisco Feature Navigator and it would appear that there is none available with the features below  ?  My estate is a mixture of Cisco 2800 routers....Any suggestions?

Embedded Event Manager (EEM) 2.2
FHRP - EOT integration with EEM

Regards

Mary

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco EEM and EOT

No, all versions of 12.4 mainline have EEM 2.1.  To get EEM 2.2, you need to go with 12.4(2)T or higher.  I have a 2821 running 12.5(1)M in my lab which has EEM 3.1 and EOT.  But you can get it with recent 12.4T as well (e.g. 12.4(24)T).

1 REPLY
Cisco Employee

Re: Cisco EEM and EOT

No, all versions of 12.4 mainline have EEM 2.1.  To get EEM 2.2, you need to go with 12.4(2)T or higher.  I have a 2821 running 12.5(1)M in my lab which has EEM 3.1 and EOT.  But you can get it with recent 12.4T as well (e.g. 12.4(24)T).

501
Views
0
Helpful
1
Replies