Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Webcast- Automate Nexus9k

Highlighted
Community Member

Cisco ISR 4331 not working as DNS properly

Hi all,

I got an issue with a Cisco ISR 4331, it has been configured to work as a DNS for some small network with other network devices (Nexus, Catalyst and others), but the name resolution is not working properly. When I use the resolution form the Nexus devices, it work fine, but from the catalyst it does not work.

 

My DNS configuration in the 4331 is this:

ip host TEST1 10.10.10.1
ip host TEST2 10.10.10.2
ip host TEST ns NS1.TEST
ip host TEST ns ns.TEST
ip host ns.TEST 1.1.1.1 <- Router IP

ip domain name TEST

ip dns server
ip dns primary TEST soa ns.TEST admin@TEST 86400 3600 1209600 86400

The Nexus has this line:

ip domain-name TEST
ip name-server 1.1.1.1

And the Catalyst this one:

ip domain-name TEST
ip name-server 1.1.1.1

From the Nexus I got:

NEXUS# ping TEST1
PING APIC-1 (10.10.10.1): 56 data bytes
64 bytes from 172.28.36.1: icmp_seq=0 ttl=63 time=1.49 ms
64 bytes from 172.28.36.1: icmp_seq=1 ttl=63 time=0.569 ms

But from the catalyst the output is:

CATALYST#ping TEST1
Translating "TEST1"...domain server (1.1.1.1)
% Unrecognized host or address, or protocol not running.

Is there something i am doing wrong with this configuration? Does anyone has an ISR working ok as DNS? Any help will be appreciated.

90
Views
0
Helpful
0
Replies
CreatePlease to create content