I am currently having a major issue trying to distribute software via the software repository in RME (LMS 3.2). For any image I attempt to distribute, I get the following error:
SWIM1001: The input parameters to the Image Distribution/Image Import/Image Activate are invalid. You may have used incorrect Device Data for this task. Check the application log file for more details. I have examing the swim logs, but have no idea what I am looking for. Any help would be greatly appreaciated.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...