Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco LMS 3.2

I have cisco LMS 3.2 installed on the virtual machine. The problem i am facing is that i cannot detect devices automatically behind other vendor devices. I can ping the devices and i can also add manually but i need LMS to discover them automatically because of the large number of devices.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco LMS 3.2

If you can ping them, and if you can communicate with them via SNMP, you can configure the Ping Sweep Discovery module to find these devices automatically.  Just specify some subnet ranges to ping.  See my document on understanding CSDiscovery for more details:

https://supportforums.cisco.com/docs/DOC-9005

2 REPLIES
Cisco Employee

Re: Cisco LMS 3.2

If you can ping them, and if you can communicate with them via SNMP, you can configure the Ping Sweep Discovery module to find these devices automatically.  Just specify some subnet ranges to ping.  See my document on understanding CSDiscovery for more details:

https://supportforums.cisco.com/docs/DOC-9005

New Member

Re: Cisco LMS 3.2

Thnx Joe, it helped me alot. Found the problem in SNMP configuration in devices. Now everything is working. The Document is also very helpfull.

237
Views
0
Helpful
2
Replies