Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco LMS for branch routers management

Hi,

     Can Cisco LMS will work to monitor/manage the branch routers which are connected over WAN from the Head Office? If yes, what are the bandwidth requirements? The main objective is to automate the configuration backup of branch routers at central location and IOS management.

Pls help...

Rgds,

JP

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: Cisco LMS for branch routers management

Hi JP,

Yes as long as it can ping the routers then you will be fine.  You will need to make sure the SNMP/TFTP and account config is setup correctly as well.  With regard to bandwidth usage I am not sur ebaout this but it will be pretty small, the largest hit will be the pulling of the config (nightly/weekly) but the conigs are normally <50K.

Hope this helps.

David.

2 REPLIES
Community Member

Re: Cisco LMS for branch routers management

Hi JP,

Yes as long as it can ping the routers then you will be fine.  You will need to make sure the SNMP/TFTP and account config is setup correctly as well.  With regard to bandwidth usage I am not sur ebaout this but it will be pretty small, the largest hit will be the pulling of the config (nightly/weekly) but the conigs are normally <50K.

Hope this helps.

David.

Community Member

Re: Cisco LMS for branch routers management

Thank you david, but is there any other better solution?

201
Views
0
Helpful
2
Replies
CreatePlease to create content