Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco Network Assistant question

Hi

I am a new user of Cisco Network Assistant. I got it to display the network of switches in the topology view. However a couple of switches are not displayed as linked to another switch (i.e shown as seperate from the network). Could someone please let me know why this is happening and how to get the switches to display as linked to another switch.

Thanks

3 REPLIES
New Member

Re: Cisco Network Assistant question

Hi

I managed to display all the links  between the switches by adding all the switches to the cluster but on a couple of switches, I get the message "Unreachable: Autorization Failed".

All the switched are configured the same and the passwords on all switches are the same.

Any idea how to resolve this please?

Thanks

Re: Cisco Network Assistant question

The switches need CDP enabled and to be SNMP manageble

The error message smells like ACS intergration

You may not have the right to see these switches in Campus

Cheers,

Michel

New Member

Re: Cisco Network Assistant question

Hi Michel

Thanks for your reply.

I have the right to see the switches as I am the one who configured all of them from scratch and deployed them. All is working fine except that now I started to look at ways to manage them. I thought I enabled CDP on all of them but I will double check. Also I am not using ACS but planning to in the future.

Cheers

Raoul

1012
Views
0
Helpful
3
Replies
CreatePlease to create content