Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco PI 2.0 changing server's IP address

Hi everyone,

I’m using Prime Infrastructure 2.0 and I’d like to know can PI server's IP address be changed? If it can be, what procedure has to be followed?

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco PI 2.0 changing server's IP address

It should not be complex job! You just need to stop the services, change the IP of the GigabitEthernet0 interface in the configuration and start the services back up. Use this guide to change IP address on PI :

http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/2.0/command/reference/cli20_appendix_011.html#wp8796098100

-Thanks

Vinod

**Rating Encourages contributors, and its really free. **

-Thanks Vinod **Rating Encourages contributors, and its really free. **
1 REPLY
Cisco Employee

Re: Cisco PI 2.0 changing server's IP address

It should not be complex job! You just need to stop the services, change the IP of the GigabitEthernet0 interface in the configuration and start the services back up. Use this guide to change IP address on PI :

http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/2.0/command/reference/cli20_appendix_011.html#wp8796098100

-Thanks

Vinod

**Rating Encourages contributors, and its really free. **

-Thanks Vinod **Rating Encourages contributors, and its really free. **
2011
Views
1
Helpful
1
Replies
CreatePlease to create content