Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

Cisco PI2.0 -- Settings for Client-Acquisition

Hi all,

migrating from LMS 4.2x to PI 2.0 I'm familiar with the UserTracking-Acquisition-Process and

its possible settings like Acquisition-Schedule, PingSweep, Excluded Subnetz, DHCP-Handling and so on.

Now within PI 2.0 it seems that these settings are no longer available to change (Administration>System Settings>Client).

With what parameters does PI 2.0 poll client data and where can these settings be modified?

Maybe anybody passed that problem out there.

Thanks for any feedback.

Lothar

Everyone's tags (2)
3 REPLIES
Cisco Employee

Cisco PI2.0 -- Settings for Client-Acquisition

Hi Lothar,

we donot have such kind of settings in PI ..

you can check the box [ Poll clients when client traps/syslogs received ] under Administration > Client > Client  Discovery it should poll based on receiving the traps. That feature is  not enabled by default

**wired clients polling cycle  (2 hours default).

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

Cisco PI2.0 -- Settings for Client-Acquisition

Hi Afroz,

thanks for your feedback.

Are there any plans to implement the wired clients aquisition settings as known from LMS?

In our (LMS)-environment UT-Discovery takes about 1-2hours, so decreasing network-load due

to managment-traffic should be customizable.

Should be worth a thought.

Lothar

Cisco Employee

Cisco PI2.0 -- Settings for Client-Acquisition

I am not sure ,if these will be added in future releases..

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
126
Views
3
Helpful
3
Replies
CreatePlease to create content