ā02-25-2014 09:57 AM
Hi PI experts,
Wondering if there is a better way to stop PI from pulling network switches/routers information?
In Device Work Center, I cannot find a way to change the Admin Status from Managed to UnManaged.
One way in my mind is by removing the SNMP/SSH setting of the seleted devices one by one.
Thanks
Cedar
Solved! Go to Solution.
ā02-25-2014 05:07 PM
Hi Cedar,
In PI as of now we do not have the feature of unmanage and Manage which was in LMS
Your thought process is correct ,if you have a few selected devices which you don't want to get polled by LMS ,instaed of
removing it from PI completely , you can remove the credentilas that will atleast save the database entry of the device.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****
ā02-25-2014 05:07 PM
Hi Cedar,
In PI as of now we do not have the feature of unmanage and Manage which was in LMS
Your thought process is correct ,if you have a few selected devices which you don't want to get polled by LMS ,instaed of
removing it from PI completely , you can remove the credentilas that will atleast save the database entry of the device.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****
ā02-26-2014 03:06 PM
Thanks Afroz.
Good to know you feel the same way.
Cedar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide