Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Prime 2.0 - Change device Admin Status

Hi PI experts,

Wondering if there is a better way to stop PI from pulling network switches/routers information?

In Device Work Center, I cannot find a way to change the Admin Status from Managed to UnManaged.

One way in my mind is by removing the SNMP/SSH setting of the seleted devices one by one.

Thanks

Cedar

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Cisco Prime 2.0 - Change device Admin Status

Hi Cedar,

In PI as of now we do not have the feature of unmanage and Manage which was in LMS

Your thought process is correct ,if you have a few selected devices which you don't want to get polled by LMS  ,instaed of

removing it from PI completely , you can remove the credentilas that will atleast save the database entry of the device.

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
2 REPLIES
Cisco Employee

Cisco Prime 2.0 - Change device Admin Status

Hi Cedar,

In PI as of now we do not have the feature of unmanage and Manage which was in LMS

Your thought process is correct ,if you have a few selected devices which you don't want to get polled by LMS  ,instaed of

removing it from PI completely , you can remove the credentilas that will atleast save the database entry of the device.

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

Cisco Prime 2.0 - Change device Admin Status

Thanks Afroz.

Good to know you feel the same way.

Cedar

173
Views
0
Helpful
2
Replies
CreatePlease to create content