Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco Prime 4.1 DFM reports error from 6500 VSS

DFM reports fault event from a VSS:

Event_Description

OperationallyDown

Device IP

10.10.3.46

Device Type

Switches and  Hubs

Fault Last Updated At

03-Dec-2011  02:38:16

Component

CARD-10.10.3.46/1009 [Chassis 1  WS-F6700-DFC3C Distributed Forwarding Card 3 Rev. 1.4-Chassis 1  WS-F6700-DFC3C Distributed Forwarding Card 3 sub-module of 3]
Component  Class
Card

Component Event Code

1073

Description

Chassis 1  WS-F6700-DFC3C Distributed Forwarding Card 3 Rev. 1.4
Event  Category
Interface

Event Source

DFM

Location

Not Available
Serial  Number
Not Available

Standby Status

NOTAPPLICABLE

Status

NOTPRESENT

System Name

10.10.3.46

.

When logging into the VSS and doing show module and show module switch 2, it looks ok.

Anyone knows what this means?  Trying to google it, but no luck yet.

The same timestamp in DFM shows this event from the same device also (which might not be a fault (https://supportforums.cisco.com/thread/2059809)):

Event_Description

OutOfRange

Device IP

10.10.3.46

Device Type

Switches and  Hubs

Fault Last Updated At

03-Dec-2011  02:38:12

Component

VOLT-10.10.3.46/1132 [Te1/3/3  Supply Voltage Sensor]

Component Class

VoltageSensor
Component  Event Code
1080

Current Value

30.0
Event  Category
Environment

Event Source

DFM
High  Threshold

5.0

Low Threshold

1.0
Relative  Voltage Threshold
0.0  %

Status

OK
ent Sensor  Value
300

Br

Geir

546
Views
0
Helpful
0
Replies
CreatePlease to create content