cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
666
Views
0
Helpful
2
Replies

Cisco Prime Infra 2.1 Standard Install using OVA File HD Requirements

lomonaco
Level 1
Level 1

 

   Hi guys,

       I wanna install the Cisco Prime Infra Standard 2.1 using the OVA File but I haven't 900 HD Space continuous in Storage.

   Two questions

       01) The Virtual Machine allocate this space (900 HD) during the install or allocate dynamically as needed ?

       02) There is a option to install the Standard Version using less HD space ?

      Thanks

      My Best Regards

      Andre Gustavo Lomonaco

 

     

     

      

 

2 Accepted Solutions

Accepted Solutions

AFROJ AHMAD
Cisco Employee
Cisco Employee

Hi Andre,

 

AFAIK ,

1)VM allocate this space dynamically as needed.

2) you can Installed PI with less space ( HD) ,installation will go smooth , problem may occur when the size of the network go large or you manage more wired and wireless devices.. there are other factors too..

 

Thanks-

Afroz

**Ratings Encourages Contributors ***

 

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

View solution in original post

Duong Nguyen
Level 1
Level 1

Initially we installed medium when Prime 2.0 came out, however about 3 months lately we needed to upgrade to standard/pro.  Upgrading the CPU/Core was seamless  

 

Install a smaller OVA with enough cpu/cores for the standard and just add disk space later on

 

https://supportforums.cisco.com/document/9871606/adding-disk-space-prime-infrastructure

 

Its not a recommended practice but there are work around...

View solution in original post

2 Replies 2

AFROJ AHMAD
Cisco Employee
Cisco Employee

Hi Andre,

 

AFAIK ,

1)VM allocate this space dynamically as needed.

2) you can Installed PI with less space ( HD) ,installation will go smooth , problem may occur when the size of the network go large or you manage more wired and wireless devices.. there are other factors too..

 

Thanks-

Afroz

**Ratings Encourages Contributors ***

 

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

Duong Nguyen
Level 1
Level 1

Initially we installed medium when Prime 2.0 came out, however about 3 months lately we needed to upgrade to standard/pro.  Upgrading the CPU/Core was seamless  

 

Install a smaller OVA with enough cpu/cores for the standard and just add disk space later on

 

https://supportforums.cisco.com/document/9871606/adding-disk-space-prime-infrastructure

 

Its not a recommended practice but there are work around...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco