Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco Prime Infrastructure 1.4

Hi all,

I need the functional future plan for cisco prime infrastructure 1.4.

I want to see if the topology services (which is supported in LMS) can be made in PI 1.4 or in its future plan?

Everyone's tags (3)
3 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Cisco Prime Infrastructure 1.4

Ideally once a software is released, there are only bug fixes and performance improvement plans on that perticular release.

Features such as Topology, which is a major feature, will not be introduced to any older PI versions. When ready it will be integrated and released with the upcoming version of CPI.

There is least posibility for this feature to come on version 1.4. It is expected to be released with CPI 2.1, which is expected Q2'14.

-Thanks Vinod **Rating Encourages contributors, and its really free. **
Cisco Employee

Cisco Prime Infrastructure 1.4

Hi Mohamed,

As Vinod said topology is not yet supported in PI 2.0 , expecting it to be in PI 2.1.

you can also check the below link for feature comparison between LMS and PI:

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Cisco Employee

Cisco Prime Infrastructure 1.4

I am glad it helped..

Kindly resolved the thread...

******Rating encouraged contributors********

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
4 REPLIES
Cisco Employee

Cisco Prime Infrastructure 1.4

Ideally once a software is released, there are only bug fixes and performance improvement plans on that perticular release.

Features such as Topology, which is a major feature, will not be introduced to any older PI versions. When ready it will be integrated and released with the upcoming version of CPI.

There is least posibility for this feature to come on version 1.4. It is expected to be released with CPI 2.1, which is expected Q2'14.

-Thanks Vinod **Rating Encourages contributors, and its really free. **
Cisco Employee

Cisco Prime Infrastructure 1.4

Hi Mohamed,

As Vinod said topology is not yet supported in PI 2.0 , expecting it to be in PI 2.1.

you can also check the below link for feature comparison between LMS and PI:

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

Cisco Prime Infrastructure 1.4

thanks so much Afroz


Cisco Employee

Cisco Prime Infrastructure 1.4

I am glad it helped..

Kindly resolved the thread...

******Rating encouraged contributors********

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
254
Views
5
Helpful
4
Replies
CreatePlease to create content