Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Cisco Prime Infrastructure 2.0 - no traps/info are pushed from devices

Good evening,

I have setup Cisco Prime Infrastructure 2.0 and,  though I have added manually my 4 network cores as devices without any  problem, I can't get a single trap or a single SNMP information to be  pushed into my Cisco Prime Infra.

Here is my SNMP config on my core :

snmp-server user *edited* *edited* v3

snmp-server  group *edited* v3 noauth notify  *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F

snmp-server community *edited* RO

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart

snmp-server enable traps flowmon

snmp-server enable traps transceiver all

snmp-server enable traps call-home message-send-fail server-fail

snmp-server enable traps tty

snmp-server enable traps rf

snmp-server enable traps memory

snmp-server enable traps cpu_threshold

snmp-server enable traps eigrp

snmp-server enable traps ospf state-change

snmp-server enable traps ospf errors

snmp-server enable traps ospf retransmit

snmp-server enable traps ospf lsa

snmp-server enable traps ospf cisco-specific state-change nssa-trans-change

snmp-server enable traps ospf cisco-specific state-change shamlink interface

snmp-server enable traps ospf cisco-specific state-change shamlink neighbor

snmp-server enable traps ospf cisco-specific errors

snmp-server enable traps ospf cisco-specific retransmit

snmp-server enable traps ospf cisco-specific lsa

snmp-server enable traps flex-links status

snmp-server enable traps fru-ctrl

snmp-server enable traps entity

snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config

snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up

snmp-server enable traps ether-oam

snmp-server enable traps aaa_server

snmp-server enable traps flash insertion removal

snmp-server enable traps l2tc threshold sys-threshold

snmp-server enable traps power-ethernet police

snmp-server enable traps rep

snmp-server enable traps vswitch dual-active vsl

snmp-server enable traps udld link-fail-rpt status-change

snmp-server enable traps vtp

snmp-server enable traps vlancreate

snmp-server enable traps vlandelete

snmp-server enable traps auth-framework sec-violation

snmp-server enable traps dot1x auth-fail-vlan guest-vlan no-auth-fail-vlan no-guest-vlan

snmp-server enable traps envmon fan shutdown supply temperature status

snmp-server enable traps entity-diag boot-up-fail hm-test-recover hm-thresh-reached scheduled-test-fail

snmp-server enable traps port-security

snmp-server enable traps ethernet evc status create delete

snmp-server enable traps energywise

snmp-server enable traps ipsla

snmp-server enable traps vstack

snmp-server enable traps bfd

snmp-server enable traps bgp

snmp-server enable traps bulkstat collection transfer

snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency

snmp-server enable traps config-copy

snmp-server enable traps config

snmp-server enable traps config-ctid

snmp-server enable traps event-manager

snmp-server enable traps hsrp

snmp-server enable traps ipmulticast

snmp-server enable traps isis

snmp-server enable traps msdp

snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message

snmp-server enable traps bridge newroot topologychange

snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency

snmp-server enable traps syslog

snmp-server enable traps isakmp policy add

snmp-server enable traps isakmp policy delete

snmp-server enable traps isakmp tunnel start

snmp-server enable traps isakmp tunnel stop

snmp-server enable traps ipsec cryptomap add

snmp-server enable traps ipsec cryptomap delete

snmp-server enable traps ipsec cryptomap attach

snmp-server enable traps ipsec cryptomap detach

snmp-server enable traps ipsec tunnel start

snmp-server enable traps ipsec tunnel stop

snmp-server enable traps ipsec too-many-sas

snmp-server enable traps errdisable

snmp-server enable traps ethernet cfm alarm

snmp-server enable traps vlan-membership

snmp-server enable traps mac-notification change move threshold

snmp-server enable traps vrfmib vrf-up vrf-down vnet-trunk-up vnet-trunk-down

snmp-server host *ip-address-edited* version 3 noauth *edited*

Basically all traps are enabled but absolutely nothing is showing up in my Prime Infra except that my 4 devices are "Reachable".

Here is a show snmp on the same device :

sh snmp

Chassis: *S/N Edited*

38554534 SNMP packets input

    0 Bad SNMP version errors

    14 Unknown community name

    0 Illegal operation for community name supplied

    0 Encoding errors

    38453185 Number of requested variables

    0 Number of altered variables

    17790703 Get-request PDUs

    20583581 Get-next PDUs

    0 Set-request PDUs

    0 Input queue packet drops (Maximum queue size 1000)

38490708 SNMP packets output

    0 Too big errors (Maximum packet size 1500)

    0 No such name errors

    0 Bad values errors

    0 General errors

    38371069 Response PDUs

    13 Trap PDUs

SNMP global trap: enabled

SNMP agent enabled

SNMP logging: enabled

    Logging to *edited*, 0/10, 13 sent, 0 dropped.

Can anyone point out what is wrong or missing in my configuration? I can't seem to single it out myself.

Thanks

Jeremy

1 REPLY
Cisco Employee

Cisco Prime Infrastructure 2.0 - no traps/info are pushed from d

Hi Jeremy,

SNMP traps are shown in the events and alerts section of PI.

SNMP config looks fine. Can  you run the SNMP debug (debug snmp packets ) .check the logs and see if the device is actually sending the TRAPS to the PI server.

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
909
Views
0
Helpful
1
Replies
CreatePlease to create content