Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Cisco Prime Infrastructure 2.1.0.0.87 - VLAN.DAT fetch failure

Hello Fellow Networkers,

I'm encountering Fetch VLAN Configuration failures from a bunch of Cisco 3560 switches (c3560-ipbasek9-mz.122-50.SE3) in a one department.  Whilst the vlan.dat file is deprecated, it still remains important and needs archiving.  From PI I can ssh to the switches in question and the path remains nat free.

Your input would be much appreciated.

Thank you in anticipation.

Michael

2 REPLIES
Cisco Employee

Hi Michael,This mean vlan

Hi Michael,

This mean vlan fetch is working for other sites \ devices ?

Is the job status is "partial Successful" for those 3560's ?

check if there is any firewall rule Blocking the TFTP protocol ,if yes allow the TFTP protocol and check the issue again.

 

Thanks-

Afroz

***Ratings Encourages Contributors ***

 

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Community Member

HI Guys & Gals,I tftp-served

HI Guys & Gals,

I tftp-served out the vlan.dat on the C3560 and was able to copy tftp: disk: on the Prime admin shell console.  This eliminates both the switch and the network from our enquiries.

Regards

 

174
Views
0
Helpful
2
Replies
CreatePlease to create content