I am facing some issues with user tracking for wired clients. I have configured PI to track one particular mac address, such that every time that mac is identified in the network an alarm should be generated. I have configured mac notification also in the switch ports. I observed that when the device is connected the switch is sending the mac change notification to prime but alarm is not generated until I go to " Administration>Back ground tasks>wired client status" and manually execute the task. Our requirement is that the client should send some trap to prime and prime should poll the client on receiving the trap and update the client database, subsequently generate the alarm.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...