Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Prime Infrastructure - Assurance. Upgrade from 1.2 to 2.0


We had purchased Prime Infrastructure 1.2 with SAU smartnet. Before we deployed 1.2 now I see 2.0 version is out and we qualify for upgrade license. However when I login to CCO to download the OVA file, I see 3 different editions. Express, Pro and Standard. Which one do I qualify to install? I have purchased following part numbers with 1.2 version.

R-PI12-K9     -     Qty 1

L-PI12-LF-100-LIC     -     Qty 1

L-PILMS42-100     -     Qty 1

L-PI12-LF-100     -     Qty 1

Thanks in advance,


Hall of Fame Super Silver

Re: Cisco Prime Infrastructure - Assurance. Upgrade from 1.2 to

The different OVA images simply build the ESXi guest OS with the parameters necessary to support the target size of managed networks.

For a 100 managed device license (as your PI 1.2 SKUs indicate), you will be fine with the 2.0 Express image (although can can download any one of them).

See tables 2 and 3 of the Prime Infrastructure 2.0 data sheet for specifics.

Cisco Employee

Cisco Prime Infrastructure - Assurance. Upgrade from 1.2 to 2.0


Check the below link for difference between [ Express, Pro and Standard ]

L-PI12-LF-100-LIC and

L-PI12-LF-100   :: Prime Infrastructure 1.2 - Lifecycle - 100 Device Lic PAK

are same as per my understanding and you can use these license to installed PI 2.0 with device count of 100.

Note: you  can also add additional licenses(feature license ) for more Lifecycle (via R-PI12-K9 skus), which can be used for both Prime Infrastructure and LMS.



[Do rate the post if you find it useful]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****