Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Prime LMS 4.2 integration with Netflow

Dear ALL,

My requirments are as below:

1- Deploy LMS 4.2 into the network and discover the exisiting devices like switches and routers

2- Configure Netflow on cisco switches with collector destination being the LMS 4.2

I went through the configuration guide of LMS 4.2 but couldn't find the detailed steps to do that. My main requirement is to setup LMS as the Netflow collector for cisco switches/routers doing Netflow. Can that be done? If yes, please share the related links.

Thanks,

Mohammad

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Cisco Prime LMS 4.2 integration with Netflow

Unfortunately, LMS doesn't support Netflow collection. It cannot handle the NetFlow traffic.

Cisco has another product - Cisco Network Analysis Module which can support Netflow traffic for traffic analysis.

-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

-Thanks Vinod **Rating Encourages contributors, and its really free. **
Cisco Employee

Cisco Prime LMS 4.2 integration with Netflow

AFAIK ..NAM module IP

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
7 REPLIES
Cisco Employee

Cisco Prime LMS 4.2 integration with Netflow

Hi Mohammad,

AFAIK, LMS 4.x does not have  NetFlow integration.

to add the device in LMS ,you can use device discovery , check the below link:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-0/user/guide/getting_started/gsug/managdevicegrps.html#wp1055264

https://supportforums.cisco.com/docs/DOC-9005

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Cisco Employee

Cisco Prime LMS 4.2 integration with Netflow

Unfortunately, LMS doesn't support Netflow collection. It cannot handle the NetFlow traffic.

Cisco has another product - Cisco Network Analysis Module which can support Netflow traffic for traffic analysis.

-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

-Thanks Vinod **Rating Encourages contributors, and its really free. **
New Member

Cisco Prime LMS 4.2 integration with Netflow

Thank you guys,

I was wondering because I was reading through:

http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/guide_c07-714720.html

It mentions the assurance license that can be installed on Prime 1.2 and NAMs can be integrated

So, if I installed Prime 1.2 or Prime 2.0, I will be able to integrate the prime with Cisco NAM and aggregate Netflow traffic?

I mean the destination IP address in Netflow configuration of switch will be the IP address of the NAM not the Prime 1.2/2.0 itself, am I right?

Thanks,

Mohammad

Cisco Employee

Cisco Prime LMS 4.2 integration with Netflow

Yes with Asssaurace license in PI  ,it will work

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

Cisco Prime LMS 4.2 integration with Netflow

Thanks Afroz,

And the destination IP address of Netflow will be the Prime address itself of the NAM module IP address?

Thanks.

Cisco Employee

Cisco Prime LMS 4.2 integration with Netflow

AFAIK ..NAM module IP

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

Cisco Prime LMS 4.2 integration with Netflow

Thanks a lot

553
Views
4
Helpful
7
Replies
CreatePlease login to create content