I also am upgrading for a WCS to the Prime NCS 1.2 with the LMS built in, and would love a training class on that. Online is ok I guess, but I tend to get the most out of instructor lead classes. I have used old school CiscoWorks LMS before and am excited to see the newer versions tied with the wireless.
The business unit guys mentioned they are working with some training partners to set up a class for the new products. I'd recommend you check out one of the weekly demo / Q and A sessions in the meantime. You can ask your questions directly to the Cisco Prime team live during one of those sessions.
They will be starting up again in the 2nd week of January.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...